Grid view List view

Showing all 8 results

Rack N Roll ADVENTURE Carrier

$1,295.00

Rack N Roll Adventure Bike Carrier

Engineering on Point, this is our strongest rack yet !

5mm A5005 Outer Channel – Black

Ullrich 6061 T6 Structural RHS – Orange

Orrcon Australian Tube Mills Main Bar with 8mm MS350 Bluescope Plate welded inside.

Bluescope 8mm MS350 Plates connect Bike Channel to Orrcon Main Bar with Hobson Engineering M12 8.8 bolts in double shear.

This rack can carry two ADV bikes if you can get them one on top of the other !

This Carrier is for vehicles with 300kg-350kg Tow Ball Capacity so Full Size 4WD’s, Dual Cab’s etc.

There is a lot in this carrier, hence the cost but this is a high quality product designed especially for ADV bikes.

Will also take MX / Enduro bikes and some street bikes with up to 170 rear tyres depending on ground clearance as to the loading ramp you will need.

$1295 Includes LED kit, Snap Hooks, Turnbuckles, Shackles but DOES NOT include loading ramp as you may have one already.

Select options

Rack N Roll eBike Carrier

$695.00

Rack N Roll eBike Carrier

This is really made for 60kg bikes like Stealth Bombers, UBCO, Sur-Ron etc.

Available as a SINGLE $695 or a DOUBLE $995.

Can handle 100kg as a single or 150kg as a double.

5mm Aluminum bike channels same material as our Alloy MX Carrier.

Double Tie Down Points so you can run 2 straps each side of each bike.

Bike Channels are 80mm internal.

As a Double weighs 26kg so there’s a bit of beef in it but that’s what you get with 150kg rating.

LED Kit Included also has a number plate light.

 

 

 

Select options

RACK N ROLL MX Carrier

$590.00

Rack N Roll MX Motorcycle Carrier

5 Year Structural Warranty and Designed for serious off road use.

There is no better way to transport your bike.

Once you pull a bike down 35mm by the pegs / frame you’ll never use tie downs again.

Bike is super secure and it doesn’t compress your forks, will not even hold a fork saver in place.

Dropping your front wheel in a hole and yanking your bike down with tie downs is cave man stuff.

This new model will handle bikes up to 180kg.

RH LED Bracket now rotates downwards allowing lower clearance bikes to be loaded.

The Rear Wedge can also be moved forwards for 17″ or 19″ Wheels.

The Nose Cone can take 17″, 19″ or 21″ Wheels.

This model can load RH or LH side.

Main Bar is 50 x 5mm Orrcon Aust Tube Mill SHS with 4mm mounting plates

Carrier is supplied with everything needed to use it: Snap Hooks, Turnbuckles, Shackles, Loading Ramp, Anti Tilt Bracket with Packer Plates for snug receiver fit, Strap to stop turnbuckles vibrating loose.

Price includes LED light kit with number plate light plus a place to bolt an accessory plate where it shines, 7 flat plug.

 

Select options

Rack N Roll ALUMINIUM MX Carrier

$690.00

5 Year Structural Warranty and Designed for serious off road use.

Aluminium version of our MX Carrier, lighter and more versatile.

20.8kg minus the loading ramp or 26kg incl ramp.

Standard all steel version is 32kg incl loading ramp.

Only the Bike Channel is aluminium, all other parts are the same as the standard MX Carrier.

For bikes up to 150kg.

Carrier is supplied with everything needed to use it: Snap Hooks, Turnbuckles, Shackles, Loading Ramp, Anti Tilt Bracket with Packer Plates for snug receiver fit, Strap to stop turnbuckles vibrating loose.

Price includes LED light kit with number plate light plus a place to bolt an accessory plate where it shines, 7 flat plug.

Select options

Rack N Roll MTB / E-Bike Carrier

$550.00

Rack N Roll MTB / E-bike Carrier

All Aluminium Construction

Can handle 30kg bikes no problem, can be made to handle 60kg bikes like Stealth Bombers etc

Available as a Single $550 or Double $695 as pictured

Double weighs 15kg so very easy to get on and off your vehicle

Bikes pictured have 3″ Tyres

Tyre slides V narrows down to 10mm to also hold Road Bikes

Tyre slides can be adjusted for various bikes

LED kit included also includes Licence Plate light

Australian Made 350kg rated Straps ADD $49.50 to cost

 

Select options

Rack N Roll Mini bike, Postie and 50cc Scooter Carrier

$695.00

100% Australian Made Product !

Mini Bike Carrier is designed for Pee Wee’s through to TTR125 LW’s

Also a good option for POSTIE Bikes and 50cc Scooters !

Secure bike with tie downs off the frame to make rock solid, then a couple off the front just to finish off.

Once you pull down by the frame the straps on the forks are just a finishing touch, pull down 20mm is all that’s required.

Price includes 12v LED kit, plug of your choice and loading ramp that stores on the carrier.

Select options

RACK N ROLL Scooter & Mid Size Sport Bikes

$1,095.00

100% Australian Made Product !

I’ve been too flat out to get decent pictures of this model, the pictures on the bench are the latest version.

The pictures with the bikes are of the earlier version.

This carrier is designed to carry SCOOTER / MOPED / SPORT BIKES 250-400cc / NAKED’s / Retro Bikes.

Up to 180kg as standard, can be beefed up if needed.

Made especially for low clearance bikes, LED bracket on loading end swivels down for loading/unloading.

Bike Channel and Loading Ramp are smooth one piece sections so very easy to load your bike unlike the ladder type designs that small wheels don’t like.

Has adjustable Orange tyre slides that lock onto your front tyre holding bike upright while you strap it.

Tie down bars front, center and rear gives three tie down points each side of the bike so will be super secure.

Alloy loading ramp stores inside carrier.

Carrier can be offset for Mopeds/Scooters or centered for Road bikes.

Black outer bike channel is 2.5mm Bluescope Galvabond plate, Orange inner bike channel is 100 x 50 x 3 Ullrich Aluminium.

Main bar into tow bar is 50 x 5 Bluescope SHS with 6mm MS350 connection plates welded in spray transfer with M12 8.8 Hobson Engineering bolts in double shear.

Hobson Engineering 8.8 bolts used to assemble.

This carrier is super strong but still light enough to easily handle for fitting to your vehicle.

See FITMENT information below.

Select options

Rack N Roll SPORTS Carrier

$1,395.00

Rack N Roll Motorcycle Carrier Sport Bike Carrier

Engineering on Point here !

8mm Connection Plates, M12 8.8 bolts in double shear, 12mm Plate welded inside the SHS, this rack will carry more than our tow bars max ball capacity.

This Carrier needs to be used on vehicles with 300kg-350kg Tow Ball Capacity so Full Size 4WD’s, Dual Cab utes etc.

There is a lot in this carrier, hence the cost but it is a high quality product designed especially for Sport bikes.

One man loading and unloading in 3 minutes with no fear of you ending up on a YouTube Motorcycle Loading Fails video !

Select options